Remote Desktop For Computer Having Dynamic ip

1. Using hamachi:-

Introduction:-
The Reason which stop you from connecting to remote computer using dynamic ip is that your isp provide you two ip one which is inside the Lan and other outside the lan this is that ip which change every time you On your computer or restart connection( so because of that conflict you can do remote connection with computer). so one way of doing remote connection would be by joining same lan(then we don't need to go outside the lan) and then connecting to the computer. therefore for this we use hamachi(software) which you can download from here.

Steps:-
1. As soon as downloading gets over install it into your computer in the process of installing it will ask you for
a) Your name
b) Network to join(you can create a network)
c) password of network(give password for that network)
here you can consider network as one lan and to join any network you must know password because you want to connect to your friends computer so tell your friend to join the network that you have created.
2. once hamachi is installed look at system tray you will found here a three green dots in traingular form (appeared) click on it.
3. then you will get a window as shown.

the ip shown on the above part of this window is your ip address and similarly your friend will get different one. after you both join the group you both will be listed into your network. hence now you can use these ip address for remote connection.
NOTE:- you can use my network
network: tarunkumarsinghal
password:tarun




2. Using Ammyy Admin
Introduction:-
other way of remote connection is using other software.
there are so many software on the web that can be used for remote connection. but most of them are so complecated that we first have to read about them on net before we use it. so to sovle this problem i have found one software which is very easy to use and operate. named ammy admin it is a free software.

Steps to use it for remote connection are as follow:-
1. downoad it from here.
2. start by double clicking.
3. a window will open ask your friend for it your id and write it into your windows box and click connect and that' it.
4. Now enjoy remote connection.
NOTE:-if you have static ip then you can refer to this page as well

How To Setup Remote Desktop Connection In Windows Xp Vista

Introduction:-
This software is used for establishing remote connection b/w to computer on the internet i.e., we can remotely control one computer from other. This is a microsoft product which comes in xp and later version of windows and for person having previous version of windows(like 98, 95) then they can download it from here.

How To Use it!!(Steps):-

1. First step would be to check which version of windows are you using if it is xp or later then it is fine but if have previous version of windows then download remote desktop connection from above mentioned site.

2. Now you have to remove all the restriction for remote desktop(follow steps to remove restriction):-

1. right click on my computer >> properties >>remote(tab) here check the box saying "allow user to connect remotely to this computer".
2. go to control panel >>windows firewall >>Exceptions(tab) here check box ahead of "remote desktop".

3. Once you have removed all restriction open remote desktop connection by going to

"Start>> All Programs>> Accessories>> Communication>> remote desktop connection"

by going this you will get a window similar to shown below.




4. Now in the box type(in window the appeared) the ip address of your friends computer and then click connect.
NOTE:-ip address can be found by typing ipconfig in his\her cmd(command prompt)

5. Now you will be prompted for user name and passward, ask your friend for his/her username and password of the computer login screen. fill it and enjoy remote connection(if password is not set then tell your friend set it otherwise you will not be able to connnect to her/his computer)

NOTE:-Before doing all of that you first must know, the computer you are connecting to has static ip or not, if not then you will not be able to do remote connection.(ask isp(internet service provider) for this)

Alternative:- if you do not have static ip addess then how to do remote connection

How to Download buffered video

Introduction:-
I have write this post for those person who, like me, could not see the video directly on browser may because of low speed.
An interesting thing about all the video that you see on browser before being displayed on screen is that it firstly download on your computer at "C:\Documents and Settings\"user name"\Local Settings\Temp" or at "C:\Documents and Settings\"user name"\Local Settings\Temp\Temporary Internet Files" with some name. the data stored at 2nd place can be retained but in first case there is a problem you can not access this data because during the browser is running this file can not be accessed(because whenever any process is taking place the cause of this process is locked) and after you turn browser off the data automaticaly deleted. Therefor here we use a tool which can stop the process and then can copy this data. named unlocker you can download it from here.



Steps:-

1. Find the file in above mentioned two directory(green colored string) with memory in range of Mb.

NOTE:-
a)the above mentioned file is of tmp extention.

b)see its memory by going through the property of file not by overing it.

2.Now, right click on this file and then go to unlocker. then you will get a window as shown below.




3.then, from the combo box(left bottom corner of window appeared) select copy.

4. now, it will prompt for address where you want file to be copied

5.Now, for playing this copied file first change tmp extention to flv and run it using any flv player like(km player or vlc player).

Watch Video on How to Download Youtube Video.


The End!