How to use Netmeeting For Audio Video Conferencing?

Introduction:-

Netmeeting is a program available on your computer(windows) that lets you communicate with other people. Among other things, you can show someone else what is on your computer, and you can see what is on their's. With a telephone, it works great to ask and answer questions about your computer, it provide following functionality used because of the fact that newer version support whiteboarding, application sharing, desktop sharing, remote desktop sharing (RDS) and file transfer.

Q) How to configure/start Netmeeting?

Or

How to call person using Netmeeting?

• to configure & starting your netmeeting type conf in run.
  

• Now you will be prompted for name, email address, and some other thing so fill it.(it is not required that you should fill exact thing).
  

• Now you will be asked for the connection type.(select accordingly).
  

• Now after you have configured your netmeeting you should remove firewall from netmeeting by going to windows firewall in control panel-->exception tab here check netmeeting option.
  

• Afterward you will get a screen like shown. type there the ip address of the computer(in the box selected)to which u want to to video conferencing, share remote.
  

• That's it now you can talk to person on the other side using microphone.

Q) How to use Remote Desktop using netmeeting?

• press the botton in netmeeting as shown.

• Now a new window will appear as shown press remote desktop icon and then press share tab.
  

• Now the person on the other side can access your computer remotely in your presence(remote desktop utility of window can only allow single person at a time to see desktop.

Note:- Firewall Setting.
Before establishing remote desktop connection you should see some firewall settings.

• go to windows firewall then exception tab there check remote desktop.

• now to to advanced tab here uncheck your lan through which u r connecting.
  

• go to my computer property then remote tab here "allow remote desktop" must be checked

How to Chat in netmeeting?


For that just press the botton shown in first windows and then start typing in the box.


How to use WhiteBoard?

For using While board just press the botton as shown ahead to the question in first image and now u and the person on the other side can create image or anything simultaneously.


How to transfer file in netmeeting?

1) firstly press the button as shown just above then u will get a window as shown below.


2) then press the button 1 in the above and put the location of file u want to transfer.

3) now press button 2 in the above picture ( to send file).

4) That's it.

NOTE: Netmeeting when you have different lan ip and real ip.
now a days because of the shortage of ip address most of the internet service provider(isp) provide different lan and real ip.
real ip:-the ip through which u are connect to the internet.
lan ip:- the ip through which u are connect to your lan.
due to which we could not connect our computer using netmeeting. but there is a solution for that and that is hamachi
this is a software from logmein which is used for chat and file browsing perpose it is providing us static and real ip for the chat and file sharing and hence we are using the ip provided by hamachi for netmeeting.
for configuration of hamachi go see the video.
hamachi video

How to make pen drive bootable?

Introduction:-
Now a days many operating system are coming into market of linux. but because of the cost of original cd people usually download it from net and write it into cd and then run it. for testing an operating sysytem wasting the cd is not good task as well.So for testing there is a simple way to do it, and that way is making your pen drive bootable and installing OS into it,

Now the question arises that our pen drive is not a bootable device but we can make it bootable by creating track and sector on it by using software

Steps:-

• Firstly format your pen drive into disired format which os require for example dos require fat 16 and all the newer versions support fat32 and ntfs.
  

Note:- windows in build utility does not provide you fat16 and many more formatting option so you have to do it using other utility search on google for required format.

• Now create bootsector into your pen drive using the software
  

a) syslinux utility(command line e.g in cmd)

type "\syslinux.exe -m -a -d /boot/syslinux z:" (z=pen drive letter)

or

b) HP Drive Key Boot Utility (graphical).

1) install it into your computer.
2) now start it from start menu.
3) follow the simple steps and tell it to make your pen drive bootable.

How to use Microsoft Virtual PC or sun's Virtualbox?

Introduction:-
Both mircosoft virtual pc and virtualbox are virtuallization product which are used to install an operating system what ever it is (windows or linux) inside another operating system. it is very usefull for those person who needs to work on both linux and windows because using this software we can run both windows and linux at the same time and without any delay can switch b/w them.
download links for both these software is provided below.
1) microsoft virtual pc(only for windows system ).
2) Sun Microsystems virtual box(for all platform ).
both of these software are equally good for you but i prefer virtual box.
don't worry i will teach you both.

Q)How to use virtual pc?
Ans)
1) First of all you have to download it from the above link.

2) Now install it onto you system.

3) During installation it may require from you the detail and minimum requirement for the system(operating) that you want to install onto you windows system, Fill it accordingly(if you have a problem filling it than see the cd cover or search on google for minimum requirement.

4) If it does not ask for that or u haven't fill it during installation u can do it after installation as well for that u have to go start-->all program-->virtual pc.

5) On clicking it you will get a screen like shown here.

6) Now click onto setting button shown on that window then you will got another windows as shown below:-


7) Among all setting minimum (ram, harddisk is most). To fill it click a on left side of the image like on clicking memory for setting ram on harddisk 1 for setting harddisk.

8) you can enable or disable any other things that u want virtual box should give to operating system( that u want to install ) for examle in sound setting unchecking enable sound will disallow from using the sound card by the operating system inside the virtual pc.
9) On completing these setting press ok and now insert cd into the cd drive and press ok on the first winow of virtual pc.
10) Now u will be getting a new window(black) which looks similar to your starting boot screen.
11) And that it u can now install operating system in there or even can run live cd.




NOTE:-
Q) How to run virtual pc using iso image?
you can run virtual pc using an iso image for that do all the step as i have said and when black screen came go to the cd menu and press capture iso image in there and give location of iso image and you are done now. you can run virtual pc using iso image.


Q) How to use virtual box?
Ans)
1) After downloading virtual box using the above link install it onto your system.

2) Now after installing it run it by going to start-->all program-->Sun xVM VirtualBox-->VirtualBox.( you will get the screen as shown below.)


3) Now we have to do setting for operating system as we have done with virtual pc for that click onto general(blue in color).

4) Now in detail tab type name for the machine, os type and type the base memory(ram) required for the os u want to install on it.

5) don't change video memory value and if u want to modify it don't exceed it from you video ram's(not even equal to it) value because your operating system out side the virtual box also need some amount of video ram to display things.

6) And leave rest of the things as it is.(you can enable or disable things like cd rom or writer for that go to cd/dvd rom option.

7) Now you have done doing setting you can now start it by pressing start in first window of virtual box with green arrow.

NOTE:- like virtual pc here you can also use iso image instead of cd or dvd for that go to cd/dvd rom press iso image and link your iso image. and press start.

8) Now you will get the black screen which you will find when every time u start your computer.

9) And that's all you have done running virtual box.


NOTE:- virtualization create another machine onto your computer with different configuration according to os need.

How To change Ip address?

Introduction:-
Changing the ip address of a computer refers to spoofing ip address. actualy now you can not spoof your ip address because when you spoof your ip address and send the message on the network then the gateway from which your message passess to the server will not except your request because this gateway except request only from a computer that is under its range and because you have changed your ip so you are no more in its range therefore you will not be able to surf net. hence we tunnel through proxy to get ip address of proxy server and surf net with different ip address.
In tunneling through proxy or using proxy server our request is first send to the proxy server which then send this request to server and after proxy server get's the result of this request it send this result to our computer.
there are many site which u can use for surfing site like www.browser9.com where u can put the name of site which u want's to surf. there is an ulternative to that and that is by using software called ultra surf which tunnel our request directly. and providing a simple and easy way to surf net without going to proxy site to visit some site.
this is very simple to operate and free to use. You can download it from here

problem in ultra surf!
older version of ultra surf don't configure mozilla to surf for proxy surf so to make it work with ultra surf do as i say:-

• go to tools in menu.
• Now click options.
• Now in new window click advanced tab then go to setting option in there.
• Fill your proxy setting as i have filled(see image).
  

TIPS:-
for easier enable and disable of proxy setting in mozilla add a addon quick proxy that will display a image on which P is written u can make it red and green by pressing.
Here green indicate that proxy is enable and red indicate that it is disabled.

Any thing other than ultra surf!!!!!!!!

OR

Ulternative of ultra surf!

vidalia bundle is a freeware integrated software used same as ultra surf do. it is an integration of privoxy and tor where privoxy is proxy server and the tor helps it to connect to proxy server.

this works on all the three mac os, linux and windows operating system.

you can download vidalia bundle for window using above link. and for linux and mac os go here

how to upgrade bios?

Introduction:-
BIOS stands for Basic Input/Output Service. it is a type of program which is stored inside the ROM chip(kind of memory like hard disk but very less) of your motherboard. So our main aim here is to update the bios stored inside ROM Chip.
Update of motherboard ROM depends on the type of memory chip used in your PC because There are two types of ROM chips used in PCs:-
1) Mask-ROM (used on old motherboards and that cannot be updated by software)
2) Flash-ROM (on almost all motherboards, which is able to be updated by software).
and because mask-rom can not be upgraded by normal user so i am leaving this upon you and will teach update of flash-rom bios.

NOTE:-Sometimes, especially when upgrading your PC, you may need to perform a BIOS upgrade in order to update your system to accept a new hardware part or to fix a bug.

STEPS:-
1) find out motherboard manufacturer, model number and bios manufacturer of your computer. You can find it by

• viewing motherboard.

• Using the software speccy.
  

2) Now go to the download center of motherboard manufacturer site and then fill the information of your motherboard and hit enter.

NOTE:-website address of some common motherboard manufacturer's site is listed here

3) Then u will be given 2 file(most probably) one will be .bin or .rom and other will be program(.exe file) according to your bios manufacturer.

NOTE:-program can be present in your driver's CD(comes with motherboard).

4) burn a cd with file(.bin or .rom) and the program(.exe).
5) Restart your computer.
6) Now boot your computer from cd(by choosing cd as first boot disc in your bios set-up(for that press del after restart).
7) type

"program name" /?

and use appropriate option for update .

for my bios i used:-

Awdflash F:\tx98-a22.bin /SN /PY /CC /R

where,

• SN: (No Save)
• PY: (Program BIOS)
• CC: (Clear CMOS)
• R: (Restart)
  

NOTE:-

u can download the file by tying the the model no of your motherboard in google(some of the site(like softpedia) will provide u the bin or rom file.
but u must download the program to upgrade your bios using the file from the motherboard manufacturer site or from cd.

For More information Click here

what is svchost.exe?

Introduction:-
Svchost.exe is a generic host process name for services that run from dynamic-link libraries (DLLs) in windows system.
During startup system create multiple instances of svchost.exe with each instance having some specific process that is defined in registry.
NOTE:- That's why you see many program named svchost.exe in task manager.

Q) where is it present?
Ans) it is present in the windir/system32 directory. As it is difficult for us to see which services are running in background or are contained by svchost.exe therefore there is a command to see all the process inside it.

tasklist /svc /fi "imagename eq svchost.exe"

here,

• tasklist: it is used to display the program under task manager
  arguments:-
  
  • svc: this argument is used to see services running behind the process.
  • fi: this argument indicate which of the program you want to select. with the name inside the double quote and also "imagename eq" ahead to file name.
    

Q) How To change Process in svchost?
Ans) The information of process to be start at startup is stored at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost.
now u can change the process to be run at startup from there.
NOTE:-

1. Change registry at your own risk.
2. kill a process using command prompt:-
   
   • press start.
   • then go to run.
   • type there cmd and hit enter
   • then type taskkill /IM "process name"
   • hit enter.
     

For more detail go here

Create Vertical Menu

We have learned how to create horizontal menu before. Now we will try to make a vertical menu. We will make a vertical menu like the image. Ok let's do it

1. Login to blogger then choose "Layout-->Edit HTML"
2. Put the script below before this code ]]></b:skin> or put it in CSS code area.

.glossymenu, .glossymenu li ul{
list-style-type: none;
margin: 0;
padding: 0;
width: 185px; /*WIDTH OF MAIN MENU ITEMS*/
border: 1px solid black;
}
.glossymenu li{
position: relative;
}
.glossymenu li a{
background: white url('http://blog.superinhost.com/vertical/blue1.gif') repeat-x bottom left;
font: bold 12px Verdana, Helvetica, sans-serif;
color: white;
display: block;
width: auto;
padding: 5px 0;
padding-left: 10px;
text-decoration: none;
}
.glossymenu li ul{
position: absolute;
width: 190px;
left: 0;
top: 0;
display: none;
}
.glossymenu li ul li{
float: left;
}
.glossymenu li ul a{
width: 180px;
}
.glossymenu li a:visited, .glossymenu li a:active{
color: white;
}
.glossymenu li a:hover{
background-image: url('http://blog.superinhost.com/vertical/blue2.gif');
}

* html .glossymenu li { float: left; height: 1%; }
* html .glossymenu li a { height: 1%; }

You can change the menu color, look at the red text (blue1.gif and blue2.gif). Change it with some color menu below. For example, if you want to choose red color, then the code would be like this :

.glossymenu li a{
background: white url('http://blog.superinhost.com/vertical/red.gif') repeat-x bottom left;

dan

.glossymenu li a:hover{
background-image: url('http://blog.superinhost.com/vertical/red.gif');

Vertical Menu Color :

	blue1.gif blue2.gif
	green1.gif green2.gif
	red1.gif red2.gif
	pink1.gif pink2.gif
	black1.gif black2.gif

3. Save your template.
4. Then go to "Page Elements" menu
5. choose "Add a Gadget -->HTML/JavaScript" the insert the code below.

<ul id="verticalmenu" class="glossymenu">
<li><a href="/">Home</a></li>
<li><a href="http://trik-tips.blogspot.com">Trik Blog</a></li>
<li><a href="http://x-template.blogspot.com" >Free Template</a></li>
<li><a href="http://getebook.co.cc">Free Ebook</a></li>
</li>
</ul>

Note :
- The red code is the links.
- The Blue code is anchor text.
- If you want to add menu, just copy the blink code and paste it.

6. Then click "Save"