1. Using hamachi:- Introduction:- The Reason which stop you from connecting to remote computer using dynamic ip is that your isp provide you two ip one which is inside the Lan and other outside the lan this is that ip which change every time you On your computer or restart connection( so because of that conflict you can do remote connection with computer). so one way of doing remote connection would be by joining same lan(then we don't need to go outside the lan) and then connecting to the computer. therefore for this we use hamachi(software) which you can download from here. Steps:- 1. As soon as downloading gets over install it into your computer in the process of installing it will ask you for a) Your name b) Network to join(you can create a network) c) password of network(give password for that network) here you can consider network as one lan and to join any network you must know password because you want to connect to your friends computer so tell your friend to join the network that you have created. 2. once hamachi is installed look at system tray you will found here a three green dots in traingular form (appeared) click on it. 3. then you will get a window as shown.
the ip shown on the above part of this window is your ip address and similarly your friend will get different one. after you both join the group you both will be listed into your network. hence now you can use these ip address for remote connection. NOTE:- you can use my network network: tarunkumarsinghal password:tarun
2. Using Ammyy Admin Introduction:- other way of remote connection is using other software. there are so many software on the web that can be used for remote connection. but most of them are so complecated that we first have to read about them on net before we use it. so to sovle this problem i have found one software which is very easy to use and operate. named ammy admin it is a free software.
Steps to use it for remote connection are as follow:- 1. downoad it from here. 2. start by double clicking. 3. a window will open ask your friend for it your id and write it into your windows box and click connect and that' it. 4. Now enjoy remote connection. NOTE:-if you have static ip then you can refer tothis pageas well
Introduction:- Now a days many operating system are coming into market of linux. but because of the cost of original cd people usually download it from net and write it into cd and then run it. for testing an operating sysytem wasting the cd is not good task as well.So for testing there is a simple way to do it, and that way is making your pen drive bootable and installing OS into it,
Now the question arises that our pen drive is not a bootable device but we can make it bootable by creating track and sector on it by using software
Steps:-
Firstly format your pen drive into disired format which os require for example dos require fat 16 and all the newer versions support fat32 and ntfs.
Note:- windows in build utility does not provide you fat16 and many more formatting option so you have to do it using other utility search on google for required format.
Now create bootsector into your pen drive using the software
Introduction:- Both mircosoft virtual pc and virtualbox are virtuallization product which are used to install an operating system what ever it is (windows or linux) inside another operating system. it is very usefull for those person who needs to work on both linux and windows because using this software we can run both windows and linux at the same time and without any delay can switch b/w them. download links for both these software is provided below. 1) microsoft virtual pc(only for windows system ). 2) Sun Microsystems virtual box(for all platform ). both of these software are equally good for you but i prefer virtual box. don't worry i will teach you both. Q)How to use virtual pc? Ans) 1) First of all you have to download it from the above link.
2) Now install it onto you system.
3) During installation it may require from you the detail and minimum requirement for the system(operating) that you want to install onto you windows system, Fill it accordingly(if you have a problem filling it than see the cd cover or search on google for minimum requirement.
4) If it does not ask for that or u haven't fill it during installation u can do it after installation as well for that u have to go start-->all program-->virtual pc.
5) On clicking it you will get a screen like shown here.
6) Now click onto setting button shown on that window then you will got another windows as shown below:-
7) Among all setting minimum (ram, harddisk is most). To fill it click a on left side of the image like on clicking memory for setting ram on harddisk 1 for setting harddisk.
8) you can enable or disable any other things that u want virtual box should give to operating system( that u want to install ) for examle in sound setting unchecking enable sound will disallow from using the sound card by the operating system inside the virtual pc. 9) On completing these setting press ok and now insert cd into the cd drive and press ok on the first winow of virtual pc. 10) Now u will be getting a new window(black) which looks similar to your starting boot screen. 11) And that it u can now install operating system in there or even can run live cd.
NOTE:- Q) How to run virtual pc using iso image? you can run virtual pc using an iso image for that do all the step as i have said and when black screen came go to the cd menu and press capture iso image in there and give location of iso image and you are done now. you can run virtual pc using iso image.
Q) How to use virtual box? Ans) 1) After downloading virtual box using the above link install it onto your system.
2) Now after installing it run it by going to start-->all program-->Sun xVM VirtualBox-->VirtualBox.( you will get the screen as shown below.)
3) Now we have to do setting for operating system as we have done with virtual pc for that click onto general(blue in color).
4) Now in detail tab type name for the machine, os type and type the base memory(ram) required for the os u want to install on it.
5) don't change video memory value and if u want to modify it don't exceed it from you video ram's(not even equal to it) value because your operating system out side the virtual box also need some amount of video ram to display things.
6) And leave rest of the things as it is.(you can enable or disable things like cd rom or writer for that go to cd/dvd rom option.
7) Now you have done doing setting you can now start it by pressing start in first window of virtual box with green arrow.
NOTE:- like virtual pc here you can also use iso image instead of cd or dvd for that go to cd/dvd rom press iso image and link your iso image. and press start.
8) Now you will get the black screen which you will find when every time u start your computer.
9) And that's all you have done running virtual box.
NOTE:- virtualization create another machine onto your computer with different configuration according to os need.
